**********************************************
 FILES and TEXTURES DISTRIBUTION INFORMATION
 

FS2000 Scenery-Rhein Valley add on 
 
File name is : Rhein-add2K.zip
 Author : Scenery made by Augustine Egiomo

**********************************************

Rhein additional Scenery for use with "Rheinmsh.zip" Rhein Valley Scenery by Burkhard Renk . Best viewed with "Newsubt1.zip" summer Textures by Lennart Arvidsson . This  Scenery includes moving Aircrafts. Use very dense to see it all-recommended for very fast computers.  Use Sparse settings for slower computers.
Rheinmsh.zip and Newsubt1.zip can be found at www.Flightsim.com. All put together makes a woderfull scenery. 

Note that Newsubt1.zip is not a must though it makes it look fantastic. But Rheinms6h.zip is a must since this scenery is based on it.
  
Installation notes
====================

This Zip file is self Explanatory 

 1.- Copy the *.BGL files in "FS2000 Main Scenery" folder into your FS2000 Main Scenery folder For example, if your      FS2000 program is installed in C:\FS2000,  copy the files *.bgl into your  C:\FS2000\SCENERY folder

Note: Do not move the Folder!! Move only the contents.

 
 2.- Copy the content of "FS2000 Main Texture" folder into your main FS2000 TEXTURE, for example- the contents           are *.oav, *.af, and *.r8.
     if your FS2000 program is installed in C:\FS2000, then copy all those textures
     into C:\FS2000\TEXTURE

Note:  Do not move the Folder!!   Move only the contents!!    

 
 3.- Copy the "Rhein-add" Folder into your FS2000 Scenery folder. For example:-
     C:\FS2000\Scenery\Rhein-add

Note: Do not move the contents!!  Move the folder 


 4.- Finaly  you have to activate the scenery in your FS2000 Main menu
     world\scenery Library.  Locate where you installed the "Rhein-Add" Folder. like explained above.

 5.- There are two starting points under- FS main menu - World\goto Airport\Scenery from FS95 and before\ Rhen-Add.
     The starting points are Chopper Pad and Seaplane Start.  I guess that already explain the kind of aircraft to       be used in this scenery.
     Alternatively you can go directly to the airport  Winningen(EDRK) Runway 6 fly runway heading and you will          find the scenery at about 1-2 nm after take off, at your right side.

 6.- Fasten your seat belt and get ready for take off!!


Disclaimer
==========

Use these files at your own risk.  I do not accept any liability for its use and
any damage that it may cause.


If you do not still understand this, you can email me!

Any problems or comments should be directed to AEgiomo@aol.com

Enjoy it!!!

 



